How to sharpen a kitchen knife

Home cooks who want cleaner cuts and safer prep get a reliable edge; cue set-hold-draw-flip-lighten-rinse as you work.

A sharp edge forms when you abrade both faces of the blade at one steady angle. Keep that angle and the knife bites food with less push and less chance of slipping.

Gather: a whetstone (medium grit near 1000 is common practice; finer grits vary by kit), water or the oil your stone needs, a towel for grip, and clear counter space.

Step 01
SET the whetstone on a damp towel so it cannot skate: keep the blade pointed away from your body the whole time.
Press the stone lightly with your palm. If it stays put, the base is ready; if it creeps, fold the towel thicker under both ends.
Step 02
HOLD the handle in your dominant hand at about fifteen to twenty degrees to the stone for most Western kitchen knives (some blades run thinner).
Raise the spine about half a finger above the stone at the heel. When that gap looks even from heel to tip, the angle is locked.
Step 03
DRAW the edge across the stone from heel to tip as if slicing a thin layer off the top, guide fingers on the spine only.
Count eight to ten light passes on this face. A thin wire burr should start to catch when you wipe a fingertip away from the edge—never toward it.

The most common mistake

Rolling the wrist mid-stroke changes the angle and leaves a rounded dull edge. Lock elbow height and keep the spine gap even the whole pass.

Pro tip

Color the bevel with a dark marker before the first stroke; when the ink vanishes evenly, your angle is tracking true.

Say it every time

set hold draw flip lighten rinse

Read it as an article on How To

Step 04

FLIP the knife and match the same angle on the second face with the same heel-to-tip path.

Repeat the same eight to ten passes. The burr should now switch to the first side, proof both faces have met.

Step 05

LIGHTEN the pressure for a few alternating strokes on each face to ease the burr off without rounding the edge.

Use two or three strokes per side with almost only the knife’s weight. When neither face catches a burr, stop.

Step 06

RINSE the blade and stone under water, then dry the knife fully before any test cut.

Wipe from spine toward the edge with the towel, never the reverse. A dry blade that parts printer paper or ripe tomato skin without crushing has passed.